中華人民共和國國家標準(中國大陸GB標準)英文版 |
GB標準是中華人民共和國國家標準,也叫GB國標,是中國大陸強制執行的國家標準,所有中國大陸境內銷售的商品及提供服務都必須符合GB國家標準的要求,包括進口商品及服務; 本網站提供GB國家標準的查詢檢索,英文版翻譯,GB標準產品檢測檢驗及合規性分析服務; |
GB/T 42901-2023 钢筋机械连接件试验方法(中英文版) Test methods for mechanical connectors of steel bars |
|||
GB/T 42352-2023 金属覆盖层 钢铁上物理气相沉积镉涂层 技术规范与试验方法(中英文版) Metallic coatings - Physical vapor deposition of cadmium coatings on iron and steel - Specifications and test methods |
|||
GB/T 4334-2020 金属和合金的腐蚀 奥氏体及铁素体-奥氏体(双相)不锈钢晶间腐蚀试验方法(中英文版) Corrosion of metals and alloys-Test methods for intergranular corrosion of austenitic and ferritic-austenitic (duplex) stainless steels |
|||
JB/T 13866-2020 三轮汽车转向操纵机构性能要求及试验方法(中英文版) Performance requirements and test methods for steering mechanism of three-wheeled vehicles |
|||
GB/T 21839-2019 预应力混凝土用钢材试验方法(中英文版) Test methods of steel for prestressing concrete |
|||
GB/T 37789-2019 钢结构十字接头试验方法(中英文版) Test methods for cruciform joints of steel structures |
|||
GB/T 33365-2016 钢筋混凝土用钢筋焊接网 试验方法(中英文版) Weld steel fabric for the reinforcement of concrete—Test methods |
|||
GB/T 25774.2-2016 焊接材料的检验 第2部分:钢的单面单道焊和双面单道焊焊接接头力学性能试样的制备及检验(中英文版) Test methods for welding consumables—Part 2: Preparation of single-run and two-run technique test specimens in steel |
|||
QC/T 648-2015 汽车转向拉杆总成性能要求及台架试验方法(中英文版) Performance requirements and bench test methods of automotive steering tie rod assy |
|||
GB/T 31925-2015 厚壁无缝钢管超声波检验方法(中英文版) Ultrasonic test methods of heavy wall thickness seamless steel pipes and tubes |
|||
SY/T 6423.5-2014 石油天然气工业 钢管无损检测方法 第5部分:焊接钢管焊缝缺欠的数字射线检测(中英文版) Petroleum and natural gas industries-Non-destructive testing (NDT) methods of steel tubes. Part 5: Digital radiographic testing of the weld seam of welded steel tubes for the detection of imperfections |
|||
SY/T 6423.6-2014 石油天然气工业钢管无损检测方法 第6部分:无缝和焊接(埋弧焊除外)铁磁性铜管纵向和/或横向缺欠的金周自动漏磁检测(中英文版) Petroleum and natural gas industries-Non-destructive testing (NDT)methods of steel tubes. Part 6: Automated full peripheral flux leakage testing of seamless and welded (except submerged arc-welded) ferromagnetic steel tubes for the detection of longitudin |
|||
GB/T 30790.6-2014 色漆和清漆 防护涂料体系对钢结构的防腐蚀保护 第6部分:实验室性能测试方法(中英文版) Paints and varnishes―Corrosion protection of steel structures by protective paint systems―Part 6: Laboratory performance test methods |
|||
JGJ/T 27-2014 钢筋焊接接头试验方法标准(中英文版) Standard for test methods of welded joint of reinforcing steel bars |
|||
QC/T 29096-2014 汽车转向器总成台架试验方法(中英文版) The bench test methods of automobile steering gear |
|||
DL/T 542-2014 钢熔化焊t形接头超声波检测方法和质量评定(中英文版) Methods of ultrasonic testing and assessment of measuring results for T-Joints fillet fusion welded in steel |
|||
SY/T 6423.4-2013 石油天然气工业 钢管无损检测方法 第4部分:无缝和焊接钢管分层缺欠的自动超声检测(中英文版) Petroleum and natural gas industries. Non-destructive testing (NDT) methods of steel tubes. Part 4: Automated ultrasonic testing of seamless and welded steel tubes for the detection of laminar imperfections |
|||
SY/T 6423.3-2013 石油天然气工业 钢管无损检测方法 第3部分:焊接钢管用钢带/钢板分层缺欠的自动超声检测(中英文版) Petroleum and natural gas industries. Non-destructive testing(NDT)methods of steel tubes. Part 3: Automated ultrasonic testing for the detection of laminar imperfections in strip/plate used for the manufacture of welded steel tubes |
|||
SY/T 6423.2-2013 石油天然气工业 钢管无损检测方法 第2部分:焊接钢管焊缝纵向和/或横向缺欠的自动超声检测(中英文版) Petroleum and natural gas industries. Non-destructive testing (NDT) methods of steel tubes. Part 2: Automated ultrasonic testing of the weld seam of welded steel tubes for the detection of longitudinal and/or transverse imperfections |
|||
SY/T 6423.1-2013 石油天然气工业 钢管无损检测方法 第1部分:焊接钢管焊缝缺欠的射线检测(中英文版) Petroleum and natural gas industries. Non-destructive testing (NDT) methods of steel tubes. Part 1; Radiographic testing of weld seam of welded steel tubes for detection of imperfections |
找到:38條目 | [首頁]-[上一頁]-[下一頁]-[尾頁] | 去到: 1 2 |